Genuine GVS RPB Nova 3 inner lenses/visors (NV3-722), in a pack of 10. The inner lens is the safety lens fixed inside the Nova 3 helmet, behind the tear-offs. During abrasive blasting it's the last and most critical protective layer between the blasting enviroment and your eyes, so change it as soon as it's scratched, pitted or cracked. GVS calls this part the Nova 3 inner lens; you'll also see it sold as the inner visor or inner window. Each pack holds 10 clear lenses. A tinted version, NV3-722-T / PPEHELNV3722T, is also available.
Features
- Keeps grit and abrasive away from your eyes, behind the outer lens and tear-offs
- Held in the inner lens frame (NV3-723 / PPEHELNV3723) and sealed by the inner gasket (NV3-721)
- Quick to change: take out the inner lens frame, swap the lens, click the frame back in
- Pack of 10 clear inner lenses
- Geniune OEM part; durable and hard-wearing
Fitting
Remove the inner lens frame, replace the lens, and click the frame back into place. While the frame is out, check the inner gasket: it keeps dust out of the helmet, so replace it (NV3-721 / PPEHELNV3721) if it's worn or no longer seals. Always use the full lens system in front of the inner lens/visor: an outer lens or tear-offs (insert up to 6 visors), or a cassette lens. That way the inner lens never takes the blast directly. Consult the GVS RPB Nova 3 manual for full fitment instructions, or view the installation video under the Manual and Downloads tab.
FAQs
- How often should I change the inner lens?—Less often than the outer lens or tear-offs, because they take the rebound first. Change it when it's scratched, pitted or cracked, or when your view is still poor after you've changed the layers in front of it.
- Do these fit the Nova 2000?—No. NV3-722 is for the Nova 3 only. The Nova 2000 uses its own lens range.
- Is there a tinted version?—Yes: NV3-722-T, also in packs of 10. Ask us if you need it.